4.8mm x 13mm Phillips Pan Head Self Drilling Screw DIN 7504MH | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1000 - 1999 | £0.07 | £0.09 |
| 2000 - 4999 | £0.06 | £0.07 |
| 5000 + | £0.04 | £0.05 |
£0.09 / each
.png)
Product Specification
| Thread Size | 4.8mm |
| Thread Length | 13mm |
| Drive | PH3 |
| Head Diameter | 9.5mm |
| Head Height | 3.7mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MH |
Frequently Bought Together
Total Price: £0.00
4.8mm x 13mm Phillips Pan Head Self Drilling Screw | DIN 7504MH | A2 Stainless Steel
For sheet metal fabrication and light-gauge steel assemblies, this 4.8mm x 13mm Phillips self drilling screw can cut through compatible sheet metal before its thread engages the receiving material. This allows drilling and fastening to be completed with one fastener in many suitable assemblies. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
Pan Head Self Drilling Screws combine a drill point and self-tapping thread in one fastener. The point cuts through compatible sheet metal before the threaded section forms a mating thread, allowing the screw to drill and fasten during the same operation in suitable materials. DIN 7504MH specifies a pan head self drilling screw with a Phillips recess.
Common Applications
- Metal Brackets: Fastens brackets and support fittings to compatible sheet or light-gauge metal sections.
- Equipment Covers: Secures removable covers and access panels where a pan head provides a broad bearing surface.
- Signage and Displays: Provides a neat fixing for suitable metal signs, frames and display components.
- Light Engineering: Supports general non-critical assembly of compatible metal parts and fabricated components.
4.8mm x 13mm DIN 7504MH Pan Head Self Drilling Screw Dimensions
- Thread Size: 4.8mm
- Thread Length: 13mm
- Head Height: 3.7mm
- Head Diameter: 9.5mm
- Drive: PH3
- Standard: DIN 7504MH
- Material: A2 Stainless Steel
Key Benefits
- Self-tapping thread forms a mating thread as the screw is installed into compatible material.
- Rounded pan head creates a neat compact finish where a countersunk recess is not required.
- 9.5mm head diameter provides the bearing width beneath the rounded head.
- DIN 7504MH identifies the standard or drive format for this product.
See our wider Pan Head Self Drilling Screws category for alternative standards and drive types. You can compare other self-drilling and self-threading screw options in our full Self Drilling Screws collection. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm