4.8mm x 19mm Phillips Pan Head Self Drilling Screw DIN 7504MH | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1000 - 1999 | £0.11 | £0.13 |
| 2000 - 4999 | £0.07 | £0.09 |
| 5000 + | £0.06 | £0.07 |
£0.13 / each
.png)
Product Specification
| Thread Size | 4.8mm |
| Thread Length | 19mm |
| Drive | PH3 |
| Head Diameter | 9.5mm |
| Head Height | 3.7mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MH |
Frequently Bought Together
Total Price: £0.00
4.8mm x 19mm Phillips Pan Head Self Drilling Screw | DIN 7504MH | A2 Stainless Steel
Providing drilling and fastening in one operation, this 4.8mm x 19mm pan head self drilling screw is suited to signage, light metalwork and panel fixing. Its PH3 drive, 9.5mm head diameter and 3.7mm head height provide the key installation dimensions for this fastener. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
A Pan Head Self Drilling Screw is designed to create its own entry hole and thread in compatible metal. The rounded upper head gives a neat finish while the flat underside provides a broad bearing area for securing panels, brackets and thinner components. DIN 7504MH specifies a pan head self drilling screw with a Phillips recess.
Common Applications
- Automotive and Transport: Secures compatible trim panels, brackets, housings and lightweight fabricated components.
- General Construction: Fastens suitable metal framing accessories, brackets, fixtures and sheet-metal components.
- Control Panels: Provides a quick fixing for covers, mounting plates and internal hardware on compatible metal panels.
- Workshop Fabrication: Supports repairs, prototype work and general assembly where self drilling into suitable metal is useful.
4.8mm x 19mm DIN 7504MH Pan Head Self Drilling Screw Dimensions
- Thread Size: 4.8mm
- Thread Length: 19mm
- Head Height: 3.7mm
- Head Diameter: 9.5mm
- Drive: PH3
- Standard: DIN 7504MH
- Material: A2 Stainless Steel
Key Benefits
- Self-tapping thread forms a mating thread as the screw is installed into compatible material.
- Rounded pan head creates a neat compact finish where a countersunk recess is not required.
- 9.5mm head diameter provides the bearing width beneath the rounded head.
- DIN 7504MH identifies the standard or drive format for this product.
See our wider Pan Head Self Drilling Screws category for alternative standards and drive types. Our wider Self Drilling Screws range includes additional head styles, drive types and fastening options. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm
