4.8mm x 22mm Phillips Pan Head Self Drilling Screw DIN 7504MH | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1000 - 1999 | £0.12 | £0.15 |
| 2000 - 4999 | £0.09 | £0.11 |
| 5000 + | £0.07 | £0.09 |
£0.15 / each
.png)
Product Specification
| Thread Size | 4.8mm |
| Thread Length | 22mm |
| Drive | PH3 |
| Head Diameter | 9.5mm |
| Head Height | 3.7mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MH |
Frequently Bought Together
Total Price: £0.00
4.8mm x 22mm Phillips Pan Head Self Drilling Screw | DIN 7504MH | A2 Stainless Steel
This 4.8mm x 22mm Phillips pan head self drilling screw is designed to drill, form a mating thread and fasten into compatible metal in one installation process. The hardened drill-shaped point helps reduce the need for a separate pilot hole in suitable sheet metal, brackets, panels and fabricated components. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
Self Drilling Screws use a hardened drill-shaped point to penetrate suitable metal before the screw thread engages. Pan head versions are useful where a visible low-profile head and good clamping area are preferred over a countersunk finish. DIN 7504MH specifies a pan head self drilling screw with a Phillips recess.
Common Applications
- Metal Brackets: Fastens brackets and support fittings to compatible sheet or light-gauge metal sections.
- Equipment Covers: Secures removable covers and access panels where a pan head provides a broad bearing surface.
- Signage and Displays: Provides a neat fixing for suitable metal signs, frames and display components.
- Light Engineering: Supports general non-critical assembly of compatible metal parts and fabricated components.
4.8mm x 22mm DIN 7504MH Pan Head Self Drilling Screw Dimensions
- Thread Size: 4.8mm
- Thread Length: 22mm
- Head Height: 3.7mm
- Head Diameter: 9.5mm
- Drive: PH3
- Standard: DIN 7504MH
- Material: A2 Stainless Steel
Key Benefits
- PH3 drive matches the specified driver or bit for installation.
- A2 Stainless Steel construction provides the specified material and finish for the application.
- Flat underside of the pan head provides a broad clamping surface against panels and brackets.
- 4.8mm thread diameter with 22mm thread length provides the main screw dimensions.
See our wider Pan Head Self Drilling Screws category for alternative standards and drive types. We also stock other self-drilling and self-threading fastening styles in our complete Self Drilling Screws range. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm