4.8mm x 60mm Phillips Pan Head Self Drilling Screw DIN 7504MH | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 500 - 1999 | £0.17 | £0.21 |
| 2000 - 4999 | £0.12 | £0.15 |
| 5000 + | £0.10 | £0.12 |
£0.21 / each
.png)
Product Specification
| Thread Size | 4.8mm |
| Thread Length | 60mm |
| Drive | PH3 |
| Head Diameter | 9.5mm |
| Head Height | 3.7mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MH |
Frequently Bought Together
Total Price: £0.00
4.8mm x 60mm Phillips Pan Head Self Drilling Screw | DIN 7504MH | A2 Stainless Steel
Designed for general construction brackets and metal framing accessories, this 4.8mm x 60mm pan head self drilling screw combines an integrated drill point with a self-tapping thread. The rounded pan head gives a neat installed finish while its flat underside provides a broad bearing surface against the fixed component. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
Self Drilling Screws use a hardened drill-shaped point to penetrate suitable metal before the screw thread engages. Pan head versions are useful where a visible low-profile head and good clamping area are preferred over a countersunk finish. DIN 7504MH specifies a pan head self drilling screw with a Phillips recess.
Common Applications
- Automotive and Transport: Secures compatible trim panels, brackets, housings and lightweight fabricated components.
- General Construction: Fastens suitable metal framing accessories, brackets, fixtures and sheet-metal components.
- Control Panels: Provides a quick fixing for covers, mounting plates and internal hardware on compatible metal panels.
- Workshop Fabrication: Supports repairs, prototype work and general assembly where self drilling into suitable metal is useful.
4.8mm x 60mm DIN 7504MH Pan Head Self Drilling Screw Dimensions
- Thread Size: 4.8mm
- Thread Length: 60mm
- Head Height: 3.7mm
- Head Diameter: 9.5mm
- Drive: PH3
- Standard: DIN 7504MH
- Material: A2 Stainless Steel
Key Benefits
- DIN 7504MH identifies the standard or drive format for this product.
- Integrated drill point can reduce separate pilot-drilling operations in suitable metal.
- Rounded pan head creates a neat compact finish where a countersunk recess is not required.
- 3.7mm head height gives the stated pan-head profile.
Compare more sizes in our Pan Head Self Drilling Screws range. You can compare other self-drilling and self-threading screw options in our full Self Drilling Screws collection. If you are unsure which standard or drive suits your application, contact our team on 01233 713581.
Fri 8.30 am - 3.30 pm
