4.8mm x 70mm Phillips Pan Head Self Drilling Screw DIN 7504MH | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 500 - 1999 | £0.25 | £0.30 |
| 2000 - 4999 | £0.17 | £0.21 |
| 5000 + | £0.14 | £0.17 |
£0.30 / each
.png)
Product Specification
| Thread Size | 4.8mm |
| Thread Length | 70mm |
| Drive | PH3 |
| Head Diameter | 9.5mm |
| Head Height | 3.7mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MH |
Frequently Bought Together
Total Price: £0.00
4.8mm x 70mm Phillips Pan Head Self Drilling Screw | DIN 7504MH | A2 Stainless Steel
For sheet metal fabrication and light-gauge steel assemblies, this 4.8mm x 70mm Phillips self drilling screw can cut through compatible sheet metal before its thread engages the receiving material. This allows drilling and fastening to be completed with one fastener in many suitable assemblies. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
A Pan Head Self Drilling Screw is designed to create its own entry hole and thread in compatible metal. The rounded upper head gives a neat finish while the flat underside provides a broad bearing area for securing panels, brackets and thinner components. DIN 7504MH specifies a pan head self drilling screw with a Phillips recess.
Common Applications
- Automotive and Transport: Secures compatible trim panels, brackets, housings and lightweight fabricated components.
- General Construction: Fastens suitable metal framing accessories, brackets, fixtures and sheet-metal components.
- Control Panels: Provides a quick fixing for covers, mounting plates and internal hardware on compatible metal panels.
- Workshop Fabrication: Supports repairs, prototype work and general assembly where self drilling into suitable metal is useful.
4.8mm x 70mm DIN 7504MH Pan Head Self Drilling Screw Dimensions
- Thread Size: 4.8mm
- Thread Length: 70mm
- Head Height: 3.7mm
- Head Diameter: 9.5mm
- Drive: PH3
- Standard: DIN 7504MH
- Material: A2 Stainless Steel
Key Benefits
- A2 Stainless Steel construction provides the specified material and finish for the application.
- Self-tapping thread forms a mating thread as the screw is installed into compatible material.
- 4.8mm thread diameter with 70mm thread length provides the main screw dimensions.
- 9.5mm head diameter provides the bearing width beneath the rounded head.
See our wider Pan Head Self Drilling Screws category for alternative standards and drive types. Check out our wider Self Drilling Screws range for other self-drilling and self-threading screw styles. For product-selection support, speak with our team on 01233 713581.
Fri 8.30 am - 3.30 pm