4.8mm x 13mm Torx Pan Self Drilling Screw DIN 7504MT | A2 Stainless Steel
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 500 - 1999 | £0.10 | £0.12 |
| 2000 - 4999 | £0.07 | £0.09 |
| 5000 + | £0.06 | £0.07 |
£0.12 / each
.png)
Product Specification
| Thread Size | 4.8mm |
| Thread Length | 13mm |
| Drive | TX25 |
| Head Diameter | 9.5mm |
| Head Height | 3.7mm |
| Material | A2 Stainless Steel |
| Standard | DIN 7504MT |
Frequently Bought Together
Total Price: £0.00
4.8mm x 13mm Torx Pan Head Self Drilling Screw | DIN 7504MT | A2 Stainless Steel
This 4.8mm x 13mm Torx pan head self drilling screw is designed to drill, form a mating thread and fasten into compatible metal in one installation process. The hardened drill-shaped point helps reduce the need for a separate pilot hole in suitable sheet metal, brackets, panels and fabricated components. The A2 Stainless Steel construction provides good corrosion resistance for general engineering, fabrication and suitable exposed applications.
What Are Pan Head Self Drilling Screws?
Pan Head Self Drilling Screws combine a drill point and self-tapping thread in one fastener. The point cuts through compatible sheet metal before the threaded section forms a mating thread, allowing the screw to drill and fasten during the same operation in suitable materials. DIN 7504MT specifies a pan head self drilling screw with a Torx or hexalobular recess.
Common Applications
- Metal Brackets: Fastens brackets and support fittings to compatible sheet or light-gauge metal sections.
- Equipment Covers: Secures removable covers and access panels where a pan head provides a broad bearing surface.
- Signage and Displays: Provides a neat fixing for suitable metal signs, frames and display components.
- Light Engineering: Supports general non-critical assembly of compatible metal parts and fabricated components.
4.8mm x 13mm DIN 7504MT Pan Head Self Drilling Screw Dimensions
- Thread Size: 4.8mm
- Thread Length: 13mm
- Head Height: 3.7mm
- Head Diameter: 9.5mm
- Drive: TX25
- Standard: DIN 7504MT
- Material: A2 Stainless Steel
Key Benefits
- 4.8mm thread diameter with 13mm thread length provides the main screw dimensions.
- 9.5mm head diameter provides the bearing width beneath the rounded head.
- A2 Stainless Steel construction provides the specified material and finish for the application.
- Self-tapping thread forms a mating thread as the screw is installed into compatible material.
Compare more sizes in our Pan Head Self Drilling Screws range. You can compare other self-drilling and self-threading screw options in our full Self Drilling Screws collection. If you are unsure which standard or drive suits your application, contact our team on 01233 713581.
Fri 8.30 am - 3.30 pm