8.5mm Bonded Sealing Washer (19mm OD) | A2 Stainless Steel EPDM
| Quantity |
Unit Price
(ex. VAT)
|
Unit Price
(inc. VAT)
|
|---|---|---|
| 1 - 49 | £0.33 | £0.39 |
| 50 - 99 | £0.28 | £0.33 |
| 100 - 249 | £0.20 | £0.24 |
| 250 - 499 | £0.15 | £0.18 |
| 500 - 999 | £0.12 | £0.15 |
| 1000 - 4999 | £0.10 | £0.12 |
| 5000 + | £0.08 | £0.10 |
£0.39 / each
.png)
Product Specification
| Internal Diameter | 8.5mm |
| Outside Diameter | 19.0mm |
| Total Thickness | 2.8mm |
| Metal Thickness | 0.8mm |
| Seal Thickness | 2mm |
| Seal Material | EPDM Rubber |
| Material | A2 Stainless Steel |
Frequently Bought Together
Total Price: £0.00
8.5mm x 19mm Bonded Sealing Washer | 2.8mm | A2 Stainless Steel & EPDM
This 8.5mm x 19mm seal washer combines an A2 Stainless Steel washer with a bonded EPDM Rubber seal to help create a sealed fixing point around compatible bolts or screws. The 2.8mm total thickness and 2mm rubber section allow the seal to compress beneath the fastener across maintenance and repair work where a bolt or screw hole needs sealing.
What Are Bonded Sealing Washers?
Bonded Sealing Washers combine a metal washer with a bonded rubber sealing element. As the fixing is tightened the rubber compresses against the mating surface while the metal ring spreads the clamping load, helping create a sealed joint around the fastener.
These bonded seal washers combine a metal support ring with a bonded elastomer seal for suitable bolted and screwed connections.
Common Applications
- Roofing and Cladding: Helps seal compatible screw or bolt fixings through sheet-metal roofing, cladding and exterior panels.
- Industrial Enclosures: Provides a sealing interface around suitable fasteners used on access panels, housings and equipment covers.
- General Construction: Combines load spreading and sealing around compatible bolts used in fabricated metal and external assemblies.
- Outdoor Equipment: A2 Stainless Steel and EPDM construction suits many weather-exposed fastening points where correct sealing is required.
8.5mm x 19mm Bonded Sealing Washer Dimensions
- Internal Diameter: 8.5mm
- Outside Diameter: 19.0mm
- Total Thickness: 2.8mm
- Metal Thickness: 0.8mm
- Seal Thickness: 2mm
- Material: A2 Stainless Steel
- Seal Material: EPDM Rubber
Key Benefits
- Metal ring spreads clamping load while the bonded rubber helps seal around the fixing hole.
- 8.5mm internal diameter provides the stated clearance around the compatible fastener.
- 0.8mm metal thickness provides the specified A2 Stainless Steel supporting section.
- A2 Stainless Steel construction provides corrosion resistance for many general and outdoor applications.
Compare our hydraulic sealing washers in other internal and outside diameters to match different bolt and screw sizes. We can help you choose the correct fit on 01233 713581.
Fri 8.30 am - 3.30 pm
